Free AFCT Auto and Shop Information Questions and Answers 1

Question 1

Which of the following tools is specifically designed to measure a very small gap or clearance between two parts, such as a spark plug gap?

Accepted Answer

A feeler gauge

Answer

A feeler gauge is a tool consisting of several small lengths of steel of different, calibrated thicknesses. It is used by inserting the blades into a gap until a slight drag is felt, allowing for a precise measurement of the clearance.

Question 2

In a standard four-stroke internal combustion engine, what is the correct sequence of strokes?

Accepted Answer

Intake, Compression, Power, Exhaust

Answer

The cycle begins with the Intake stroke, drawing in the fuel-air mixture. This is followed by the Compression stroke, then the Power stroke where ignition occurs, and finally the Exhaust stroke to expel the burnt gases. A common mnemonic is 'Suck, Squeeze, Bang, Blow'.

Question 3

What is the primary purpose of a torque wrench?

Accepted Answer

To apply a precise amount of rotational force

Answer

A torque wrench is a precision tool that allows a user to apply a specific, measured amount of rotational force (torque) to a fastener. This is critical for safety and performance, as it prevents under-tightening or over-tightening bolts on components like wheels and engine parts.

Question 4

Before drilling a hole in a piece of metal, it is best practice to use a center punch to:

Accepted Answer

Create a guide dimple for the drill bit

Answer

Using a center punch creates a small indentation in the metal surface. This dimple provides a starting point for the drill bit, preventing it from 'walking' or wandering across the surface and ensuring the hole is drilled in the precise location.

Question 5

What is the function of a car's radiator?

Accepted Answer

To dissipate heat from the engine coolant

Answer

The radiator is a key component of the engine's cooling system. Hot coolant from the engine flows through the radiator's thin tubes, where airflow (from driving or a fan) dissipates the heat before the cooled fluid is circulated back to the engine.

(AFCT) Armed Forces Classification Test Practice Test

(AFCT) Armed Forces Classification Test Practice Test

Free AFCT Auto and Shop Information Questions and Answers 1