Free AFCT Assembling Objects Questions and Answers 1

Question 1

You are given a threaded bolt, a hex nut, and two flat washers to join two metal plates. What is the correct assembly order?

Accepted Answer

Bolt -> Washer -> Plate 1 -> Plate 2 -> Washer -> Nut

Answer

The bolt head needs a washer to distribute its pressure on the first plate. The bolt then passes through both plates, followed by the second washer and the nut. The washers protect the surfaces of the plates and ensure even clamping force.

Question 2

A diagram shows three gears in a line. The first gear (driver) rotates clockwise. It meshes with the second (middle) gear, which in turn meshes with the third gear. In which direction does the third gear rotate?

Accepted Answer

Clockwise

Answer

When two external gears mesh, they rotate in opposite directions. The first gear (clockwise) turns the second gear counter-clockwise. The second gear (counter-clockwise) then turns the third gear in the opposite direction, which is clockwise.

Question 3

The parts for a simple pulley are shown: a wheel with a groove (sheave), a U-shaped bracket with holes at the ends, and a pin (axle). How do these parts assemble correctly?

Accepted Answer

The wheel is placed inside the bracket, and the pin is inserted through the bracket and wheel.

Answer

The U-shaped bracket serves as the housing. The wheel (sheave) must be placed between the two arms of the bracket. The pin is then inserted through the hole on one arm, through the center of the wheel, and out the hole on the other arm, acting as an axle for the wheel to spin on.

Question 4

You are assembling a simple lamp. The parts are a heavy base, a long threaded tube, a harp (shade holder), and a socket for the bulb. What is the correct assembly order from the bottom up?

Accepted Answer

Base -> Tube -> Socket -> Harp

Answer

The assembly starts with the foundation. The heavy base provides stability, the threaded tube screws into it to create the lamp's body, the socket attaches to the top of the tube for the electrical components, and finally, the harp clips onto the socket to hold the lampshade.

Question 5

A diagram shows a disassembled C-clamp. The parts are a C-shaped frame, a long threaded rod with a handle, and a swiveling pad. How does it assemble?

Accepted Answer

The threaded rod screws through a hole in the bottom of the C-frame.

Answer

The C-frame has a fixed anvil on its top arm and a threaded hole on its bottom arm. The threaded rod is screwed through this hole, allowing it to move towards or away from the fixed anvil. The handle remains on the outside to turn the rod, and the swiveling pad is on the end that makes contact with the workpiece.

(AFCT) Armed Forces Classification Test Practice Test

(AFCT) Armed Forces Classification Test Practice Test

Free AFCT Assembling Objects Questions and Answers 1