FPE Safety Regulations & OSHA Compliance 5

Question 1

NFPA 1 (Fire Code) classifies occupancies based on the IBC system. Which High-Hazard group applies to buildings containing materials that are health hazards, such as highly toxic substances?

Accepted Answer

Group H-4

Answer

IBC/NFPA 1 Group H-4 applies to occupancies that contain materials that are health hazards, including highly toxic and toxic materials.

Question 2

Under OSHA's Lockout/Tagout standard (29 CFR 1910.147), what type of energy source requires special consideration due to stored energy that may not be immediately apparent?

Accepted Answer

Residual or stored energy (e.g., capacitors, springs, gravity)

Answer

29 CFR 1910.147 requires special procedures to relieve, restrain, or otherwise render safe stored or residual energy such as capacitor charge, compressed springs, or suspended loads.

Question 3

What is the maximum occupant load factor (sq ft per person) for a business occupancy per NFPA 101?

Accepted Answer

100 sq ft/person

Answer

NFPA 101 assigns a net floor area factor of 100 sq ft per person for business occupancy when calculating occupant load.

Question 4

OSHA's Respiratory Protection standard (29 CFR 1910.134) requires a written respiratory protection program when respirator use is required. Which element is specifically mandated in the program?

Accepted Answer

Medical evaluation of respirator users before fit testing

Answer

29 CFR 1910.134(e) requires medical evaluation of employees before they are fit tested or required to use a respirator.

Question 5

Which NFPA standard governs the design and installation of water mist fire suppression systems?

Accepted Answer

NFPA 750

Answer

NFPA 750 is the Standard on Water Mist Fire Protection Systems, addressing design, installation, and maintenance of these specialized suppression systems.

(FPE) Fire Protection Engineer Certification Practice Test

(FPE) Fire Protection Engineer Certification Practice Test

FPE Safety Regulations & OSHA Compliance 5