FPE Building Codes & Regulations 2

Question 1

Under IBC, which occupancy classification applies to a building used for the manufacture of hazardous materials in moderate quantities?

Accepted Answer

Group H-3

Answer

Group H-3 covers occupancies where moderate amounts of hazardous materials are stored or used, posing a physical or health hazard.

Question 2

What is the maximum allowable height (in stories) for a Type III-B construction building classified as Group B occupancy under the IBC?

Accepted Answer

3 stories

Answer

IBC Table 504.4 limits Type III-B, Group B occupancy buildings to 3 stories above grade plane without a sprinkler increase.

Question 3

Which NFPA standard is specifically referenced in the IBC for the design of fire alarm and detection systems?

Accepted Answer

NFPA 72

Answer

NFPA 72, the National Fire Alarm and Signaling Code, is the standard adopted by the IBC for fire alarm system design and installation.

Question 4

A mixed-use building has a Group A-2 assembly area on the ground floor and Group R-2 residential units above. Under IBC, how must the fire area separation be treated?

Accepted Answer

Separated by a fire barrier with fire-resistance rating per IBC Table 508.4

Answer

IBC Section 508.4 requires that separated mixed occupancies use fire barriers with ratings specified in Table 508.4 based on occupancy pairing.

Question 5

Under the IBC, what is the minimum fire-resistance rating required for an exterior wall with a fire separation distance of less than 5 feet for a Group R-2 occupancy of Type V-A construction?

Accepted Answer

2 hours

Answer

IBC Table 602 requires a 2-hour fire-resistance rating for exterior walls of Group R occupancies with fire separation distances less than 5 feet.

(FPE) Fire Protection Engineer Certification Practice Test

(FPE) Fire Protection Engineer Certification Practice Test

FPE Building Codes & Regulations 2