Forklift Pre-Operational Inspection Flashcards
7 cards from real Forklift certification Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Forklift Pre-Operational Inspection flashcards as text
What is the purpose of the operational (running) portion of the inspection?
Answer: To test controls, steering, and brakes with the engine on
The operational check verifies controls, steering, brakes, and lift functions work with the truck running.
During the operational check, unusual noises or vibrations should be:
Answer: Investigated and reported
Abnormal sounds or vibrations may indicate mechanical problems that must be reported.
Which gauge should be checked during a running inspection of an internal combustion forklift?
Answer: Engine temperature and oil pressure gauges
Temperature and oil pressure gauges confirm the engine is operating within safe ranges.
When testing the tilt function, the mast should:
Answer: Tilt forward and backward smoothly without sticking
The tilt control should move the mast smoothly in both directions during the operational test.
What should the operator verify about the steering during the running check?
Answer: It responds smoothly with no excessive play
Steering should respond properly without excessive looseness or difficulty turning.
Lights and warning devices should be tested during inspection when:
Answer: The forklift operates in low-light areas or where required
Headlights, warning lights, and backup alarms must work where lighting is poor or regulations require them.
A leaking or spongy brake pedal discovered during the running check means you should:
Answer: Remove the forklift from service
Faulty brakes are a critical safety defect requiring immediate removal from service.