Forklift certification Safe Driving and Maneuvering Flashcards
7 cards from real Forklift certification Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Forklift certification Safe Driving and Maneuvering flashcards as text
What determines a forklift's safe maneuvering ability when turning?
Answer: Rear-wheel steering and the load's center of gravity
Forklifts steer with the rear wheels, causing the rear to swing wide, and load balance affects turning stability.
The 'rear-end swing' of a forklift means the operator must:
Answer: Watch for the rear swinging into objects or people when turning
Because rear-wheel steering swings the back end outward, operators must keep the rear clear during turns.
When operating on a dock or near an edge, the operator should:
Answer: Keep clear of the edge and check wheel chocks
Staying away from edges and verifying chocks and dock plates prevents falls off the dock.
Why is it dangerous to turn a forklift while on a ramp or incline?
Answer: It greatly increases the risk of tipping over
Turning on a grade shifts the center of gravity sideways and can cause a lateral tip-over.
Before backing up, an operator should:
Answer: Look over the shoulder in the direction of travel
Always look directly in the direction of travel when reversing to spot pedestrians and obstacles.
How should an operator handle an overhead obstruction like a low doorway?
Answer: Check overhead clearance for the mast and load before proceeding
Verify the mast and load height against the overhead clearance to avoid striking beams or door frames.
What is the correct action if you must leave the forklift running unattended for a moment?
Answer: There is no safe way—shut it off and set the brake if you leave
A forklift is 'unattended' if the operator is 25+ feet away or out of view; it must be shut off with forks down and brake set.