Forklift Flashcards
7 cards from real Forklift certification Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Forklift flashcards as text
What is the correct hand signal role when a spotter is guiding a forklift operator?
Answer: The operator follows the spotter's signals and stops if the spotter disappears from view
The operator must obey the spotter's signals and stop immediately if the spotter can no longer be seen.
Why should forks never be used to lift or transport people unless equipped with an approved platform?
Answer: Forks are not designed for people and pose a serious fall risk
Only an approved, secured work platform may be used to elevate personnel; standing on bare forks is a fall hazard.
What is a common cause of forklift-related fatalities according to OSHA?
Answer: Tip-overs and crushing pedestrians
Forklift tip-overs and struck-by/crushing incidents involving pedestrians are among the leading causes of fatalities.
What should an operator do if the forklift develops a mechanical defect during use?
Answer: Remove it from service and report the defect
Any truck found to be in unsafe condition must be taken out of service until the defect is repaired.
When stacking loads, what practice helps maintain stability?
Answer: Ensure loads are square, stable, and within height limits
Loads should be squarely stacked, stable, and within rated height limits to prevent collapse or tip-over.
What is the purpose of the overhead guard on a forklift?
Answer: To protect the operator from falling objects
The overhead guard protects the operator from small falling objects and debris.
How much clearance should you allow when driving a forklift under a doorway or overhead obstruction?
Answer: Enough clearance for the mast, overhead guard, and any raised load
Operators must verify sufficient overhead clearance for the mast, overhead guard, and the load before passing under obstructions.