Forklift certification Certification Forklift certification Maintenance and Repairs Questions and Answers 3

Question 1

What is the correct procedure after a forklift is involved in a collision or tip-over?

Accepted Answer

Have the forklift inspected by a qualified mechanic before returning it to service

Answer

Resume work if no visible damage is found

Answer

Only inspect visually and document the incident

Answer

Replace the operator but continue using the forklift

Question 2

How should a defective forklift be clearly identified to prevent accidental use?

Accepted Answer

Attach a 'Do Not Operate' tag and notify the supervisor

Answer

Place it in a corner of the warehouse

Answer

Lock the keys in the supervisor's office only

Answer

Paint a red X on the forklift

Question 3

What is a common sign that a forklift's mast chains need inspection or replacement?

Accepted Answer

The mast chains are visibly stretched, kinked, or have cracked links

Answer

The forklift accelerates too quickly

Answer

The forks tilt more than 5 degrees

Answer

The overhead guard vibrates at high speed

Question 4

Why is it important to use only manufacturer-approved replacement parts on a forklift?

Accepted Answer

To ensure parts meet the original safety and performance specifications

Answer

To maintain warranty eligibility only

Answer

Because aftermarket parts are always more expensive

Answer

To simplify the repair process

Question 5

How should the overhead guard of a forklift be maintained?

Accepted Answer

Checked for cracks, bends, or loose mounts and repaired as needed

Answer

Removed to improve visibility during operation

Answer

Painted regularly to prevent rust only

Answer

Replaced every six months regardless of condition

Question 6

What should a forklift operator do if the steering feels unusually loose or unresponsive?

Accepted Answer

Stop operating the forklift and report the steering issue immediately

Answer

Drive slowly and complete the current task

Answer

Adjust personal driving technique to compensate

Answer

Only operate in reverse to avoid turning