Practice Test Geeks(FM) Forest Management Certification Practice Test
← All FM Flashcard Decks

FM Forest Measurements & Inventory Flashcards

6 cards from real FM practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 FM Forest Measurements & Inventory flashcards as text

  1. Diameter at Breast Height (DBH) is the standard measurement of tree diameter taken at:

    Answer: 4.5 feet (1.37 meters) above ground on the uphill side of the tree

    DBH is universally measured at 4.5 feet (1.37 m) above ground on the uphill side of sloped terrain, providing a standardized reference point for comparing tree sizes.

  2. What instrument is most commonly used to measure tree DBH in forest inventory?

    Answer: Diameter tape or calipers

    Diameter tapes (which convert circumference to diameter) and calipers are the standard field instruments for measuring tree diameter at breast height in forest inventory work.

  3. In a prism or wedge cruising system, a tree is counted in the plot when:

    Answer: Its image in the prism appears to overlap with the actual tree trunk

    In variable-radius (angle gauge) cruising, a tree is tallied when the displaced image seen through the prism overlaps the stem, selecting trees with a probability proportional to their basal area.

  4. The term 'basal area' in forest mensuration refers to:

    Answer: The cross-sectional area of a tree stem or all stems per unit area, typically expressed in square feet per acre

    Basal area is the cross-sectional area of a tree at DBH (or the sum for all trees per acre), serving as a key measure of stand density and growing stock used extensively in forest management.

  5. A 'site index' in forest management is used to:

    Answer: Measure forest site productivity based on the height of dominant trees at a base age

    Site index is a numerical measure of forest site quality based on the average height of dominant and co-dominant trees at a specified base age (commonly 25 or 50 years), predicting potential timber productivity.

  6. Which of the following sampling methods uses plots of fixed size and shape to estimate forest conditions?

    Answer: Fixed-area plot sampling

    Fixed-area plot sampling uses circular, square, or rectangular plots of predetermined size (e.g., 1/10 acre), tallying all trees within the plot to estimate per-acre conditions.