Florida General Contractor Soils and Foundation Systems Flashcards
7 cards from real Florida General Contractor practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Florida General Contractor Soils and Foundation Systems flashcards as text
What factor of safety against bearing capacity failure is typically used in foundation design?
Answer: 3.0
A factor of safety of 3.0 is the standard used in foundation design, ensuring the applied load remains well below the ultimate bearing capacity of the soil.
Which foundation type distributes a building's entire structural load across the full footprint of the structure?
Answer: Mat (raft) foundation
A mat or raft foundation is a thick continuous concrete slab beneath the entire building that distributes loads broadly, used where soil has low bearing capacity.
What is the primary structural purpose of a grade beam in a foundation system?
Answer: To connect foundation elements such as pile caps and support load-bearing walls
Grade beams are reinforced concrete beams at or near grade that span between pile caps or footings, carrying wall loads and tying the foundation system together.
Which visible sign most commonly indicates differential settlement in a structure?
Answer: Diagonal or stair-step cracks in masonry walls wider at one end
Differential settlement causes uneven movement of foundation elements, producing diagonal or stair-step cracking in masonry that is wider at the top or bottom depending on the settlement pattern.
What is the purpose of compaction testing during earthwork operations?
Answer: To verify that fill material has been compacted to the density specified by the engineer
Compaction testing confirms that fill material has achieved the required percentage of maximum dry density per ASTM standards and project specifications before construction proceeds.
What is the main foundation challenge presented by loosely compacted or disturbed sandy fill soils common in Florida?
Answer: Loss of bearing capacity and settlement under structural loads
Poorly compacted or disturbed sandy fill can consolidate and settle significantly under structural loads, causing differential settlement and foundation distress.
What is the primary function of waterproofing applied to a below-grade foundation wall?
Answer: To prevent water and moisture from penetrating into the structure through hydrostatic pressure
Below-grade waterproofing creates a barrier against hydrostatic pressure and moisture migration through foundation walls, protecting the interior and preventing structural deterioration.