Florida General Contractor Safety and OSHA Regulations Flashcards
6 cards from real Florida General Contractor practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Florida General Contractor Safety and OSHA Regulations flashcards as text
Under Florida law, how quickly must a contractor report a work-related fatality to OSHA?
Answer: Within 8 hours
OSHA requires employers to report a work-related fatality within 8 hours of learning about it.
What is the primary purpose of a confined space entry permit on a Florida construction site?
Answer: To ensure all hazards are identified and controlled before entry
A confined space entry permit documents that all recognized hazards have been identified and controlled, protecting workers entering permit-required spaces.
Which of the following ladder conditions requires removing the ladder from service on a Florida job site?
Answer: A ladder with a broken or missing rung
A ladder with broken or missing rungs must be immediately removed from service as it poses a severe fall hazard.
What does the acronym 'SDS' stand for in workplace chemical safety on Florida construction sites?
Answer: Safety Data Sheet
SDS stands for Safety Data Sheet, which provides detailed chemical hazard and safety handling information required under OSHA's HazCom standard.
Under OSHA's electrical safety standards, what minimum clearance must be maintained between combustible materials and temporary lighting on a construction site?
Answer: 12 inches
OSHA requires at least 12 inches of clearance between temporary lighting fixtures and any combustible material to prevent fire hazards.
What is the purpose of a 'toolbox talk' on a Florida construction job site?
Answer: To conduct a brief safety meeting addressing current job hazards
Toolbox talks are short, informal safety meetings held on-site to discuss current hazards, near-misses, and safe work practices.