โ† All Florida General Contractor Flashcard Decks

Florida Building Codes Flashcards

7 cards from real Florida General Contractor practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Florida Building Codes flashcards as text
  1. In FBC wind design, the basic wind speed used for a structure is primarily determined by what?

    Answer: The building's geographic location and risk category

    Basic wind speed is mapped by location and adjusted by the building's risk/occupancy category.

  2. FBC flood provisions require the lowest floor of a building in a Special Flood Hazard Area to be at or above what?

    Answer: The base flood elevation (BFE)

    Structures in flood zones must have their lowest floor elevated to or above the base flood elevation.

  3. Under the FBC, exit access travel distance limits are primarily intended to ensure what?

    Answer: Safe and timely occupant egress in an emergency

    Travel distance limits ensure occupants can reach an exit quickly during a fire or emergency.

  4. In the FBC, a building's occupancy classification (such as Group A, B, or R) primarily affects what?

    Answer: Fire, egress, and structural requirements

    Occupancy classification drives many code requirements including fire ratings, egress, and allowable area.

  5. FBC roofing requirements in coastal areas emphasize resistance to which primary force?

    Answer: Wind uplift

    Florida's roofing provisions focus heavily on resisting hurricane-driven wind uplift.

  6. Under the FBC, the term 'substantial improvement' to a structure in a flood zone typically means work costing what portion of the building's value?

    Answer: 50% or more of market value

    Improvements costing 50% or more of the structure's market value trigger full flood-compliance requirements.

  7. FBC fire-resistance rated assemblies are primarily specified using what measurement?

    Answer: Hourly rating (e.g., 1-hour, 2-hour)

    Fire-resistance of walls, floors, and assemblies is expressed as an hourly rating based on tested performance.