โ† All Florida General Contractor Flashcard Decks

Florida Building Codes Flashcards

7 cards from real Florida General Contractor practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Florida Building Codes flashcards as text
  1. The Florida Building Code (FBC) is based on which model code as its foundation?

    Answer: The International Building Code (ICC)

    The FBC is adapted from the International Code Council's family of codes, primarily the International Building Code.

  2. How often is the Florida Building Code updated to a new edition?

    Answer: Every 3 years

    Florida adopts a new edition of the Building Code on a three-year cycle.

  3. Which agency is primarily responsible for adopting and maintaining the Florida Building Code?

    Answer: The Florida Building Commission

    The Florida Building Commission oversees development, adoption, and amendment of the FBC.

  4. The High-Velocity Hurricane Zone (HVHZ) provisions of the FBC apply specifically to which counties?

    Answer: Miami-Dade and Broward

    The HVHZ encompasses Miami-Dade and Broward counties, which face the strongest hurricane wind loads.

  5. Under the FBC, wind-borne debris protection is required primarily to safeguard against what hazard?

    Answer: Building envelope breach during hurricanes

    Impact-resistant openings prevent the building envelope from being breached, which can cause pressurization and roof failure in high winds.

  6. Which volume of the Florida Building Code specifically governs one- and two-family dwellings?

    Answer: FBC Residential

    The FBC Residential volume covers detached one- and two-family dwellings and townhouses up to three stories.

  7. A product's Florida Product Approval or Miami-Dade NOA primarily documents that the product has been tested for what?

    Answer: Compliance with wind and impact requirements

    Product approvals and Notices of Acceptance verify a product meets FBC structural, wind, and impact standards.