Florida General Contractor Florida General Contractor Mechanical and Electrical Systems

Question 1

Which Florida building code governs the installation of electrical systems in new commercial construction?

Accepted Answer

Florida Building Code — Electrical (based on NFPA 70/NEC)

Answer

Florida Fire Prevention Code

Answer

ASHRAE 90.1 Standard

Answer

Florida Plumbing Code

Question 2

What does HVAC stand for in Florida construction?

Accepted Answer

Heating, Ventilation, and Air Conditioning

Answer

High Voltage Alternating Current

Answer

Hydraulic Valve and Circulation

Answer

Horizontal Vent and Cooling

Question 3

In Florida, which entity must inspect and approve the rough-in of a mechanical system before walls are closed in?

Accepted Answer

The local building department's mechanical inspector

Answer

The general contractor only

Answer

The HVAC manufacturer's representative

Answer

The project architect

Question 4

What is the primary function of a Ground Fault Circuit Interrupter (GFCI) outlet required in Florida wet locations?

Accepted Answer

To protect people from electrical shock by detecting current leakage to ground

Answer

To increase electrical power output

Answer

To reduce energy consumption

Answer

To prevent power surges from damaging equipment

Question 5

Under the Florida Building Code, which standard primarily governs energy efficiency requirements for HVAC systems in commercial buildings?

Accepted Answer

ASHRAE 90.1 (Florida Energy Conservation Code)

Answer

NFPA 101

Answer

ICC A117.1

Answer

NFPA 13

Question 6

What is the purpose of a 'P-trap' in a Florida plumbing system?

Accepted Answer

To hold a water seal that prevents sewer gases from entering the building

Answer

To increase water pressure at fixtures

Answer

To filter sediment from supply lines

Answer

To reduce water hammer in drain lines