โ† All Flood Restoration Flashcard Decks

Mold Prevention and Remediation Flashcards

6 cards from real Flood Restoration practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 6 Mold Prevention and Remediation flashcards as text
  1. How should moldy carpet and padding typically be handled in a Category 3 flood restoration scenario?

    Answer: Remove and dispose of as contaminated waste

    Category 3 contaminated carpet and padding cannot be effectively decontaminated and must be removed and disposed of as contaminated waste.

  2. What does 'protocol' mean in the context of a mold remediation plan?

    Answer: A written scope of work detailing remediation procedures, containment, and PPE requirements

    A mold remediation protocol is a written document prepared by an industrial hygienist specifying the scope, procedures, containment, PPE, and clearance criteria for remediation.

  3. Which federal agency regulates the disposal of mold-contaminated materials in the United States?

    Answer: EPA (Environmental Protection Agency)

    The EPA regulates the disposal of hazardous and contaminated materials, including mold-laden waste from remediation projects, under federal environmental law.

  4. What is the function of an ATP (adenosine triphosphate) test in flood restoration?

    Answer: Measure the presence of biological contamination on surfaces

    ATP testing detects biological contamination by measuring adenosine triphosphate, a molecule present in all living cells, on surfaces after cleaning.

  5. Why must HVAC systems be shut down or isolated during mold remediation?

    Answer: To prevent mold spores from spreading through ductwork to unaffected areas

    Operating HVAC systems during remediation can distribute mold spores through ductwork, cross-contaminating areas that were not previously affected.

  6. What does the term 'source removal' mean in mold remediation?

    Answer: Physically removing mold-contaminated materials rather than treating them in place

    Source removal involves physically removing and discarding mold-infested materials such as drywall, insulation, and flooring rather than attempting to clean them.