Examine the damage Please consider the possible extent of the damage your car might have sustained when you discover it submerged in flood.
Try your best to dry your car. Your car will always smell musty if you don’t dry it out because mold will grow there and cause it to rot.
File a claim If you have full coverage on your car insurance, the company will pay for repairs or give you the car’s cash value if it’s a total loss.
Ventilate your car After the car has dried and cleaned, open all the doors. Removing unpleasant smells, drying out of the car, and avoiding mold and mildew are all made easier with good airflow.
Examine the oil Numerous engine issues could arise if water got into your car’s oil. The dipstick may have a potential issue if water droplets are on it.
Examine the electrical system of the car. Before starting your vehicle, you should inspect its wiring.
Consider your options carefully. If you’ve had your car evaluated, find out if the repair cost is greater than or equal to the cost of a new vehicle.
Contact your insurance provider- Your insurance provider should be the company you contact first. You must be fully aware of your coverage.
Contract a Cleanup Service- If there is sewage waste, extra care and expert assistance are needed.
Hire a Contractor- One with a lot of experience repairing water-damaged homes is what you need.
Use an electrical contractor with a license – Before turning the power back on, you must have your electrical system inspected by a qualified electrical contractor for safety’s sake.
Work with an HVAC expert – Have an HVAC professional inspect your heating and cooling system, especially if you believe water has entered your heating registers and air ducts. Flood waters may have caused damage to your HVAC system.
Install new flooring- The subfloor and any damaged flooring, including laminate, hardwood, carpeting, and tile, should be completely removed.
Let Your Walls Open Up- Your walls will need to be opened up by your contractor so that the studs can dry out.
Dispose of Drywall- The more drywall is removed above the water line and down to the floor, the better. At the very least, your contractor should do this.
Take Insulation Off- Insulation made of saturated batts won’t work because it will compress, and the water will fill the air space.
Allow the Wall Cavity to Completely Dry – After your contractor has removed all the drywall and insulation, leave the space open to allow the wall cavity to dry fully.
Get an Air Test- You must check your home’s air quality following a flood to ensure it corresponds to the outside environment.
Clear out the basement- Your best option may be to completely tear the basement down to the foundation walls and start over, depending on the extent of the damage.