Personal Protective Equipment Flashcards
7 cards from real Firefighter practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Personal Protective Equipment flashcards as text
What is the recommended inspection frequency for routine visual checks of turnout gear?
Answer: After every use
Turnout gear should receive a routine visual inspection after each use for damage or contamination.
What protects a firefighter's hands while still allowing dexterity to operate tools?
Answer: Structural firefighting gloves
Structural firefighting gloves balance thermal protection with the dexterity needed for tasks.
What component of the helmet shields the face from flying debris and radiant heat?
Answer: Face shield or goggles
The face shield or goggles protect the eyes and face from debris and radiant heat.
What is the maximum service life NFPA recommends for structural firefighting protective garments?
Answer: 10 years from date of manufacture
NFPA 1851 recommends retiring structural turnout garments 10 years after the manufacture date.
During overhaul operations, why might respiratory protection still be required?
Answer: Toxic gases and particulates persist in the air
Smoldering materials release carbon monoxide and particulates, so respiratory protection remains necessary.
What is the correct way to store turnout gear when not in use?
Answer: In a clean, dry, well-ventilated area away from UV light
Gear should be stored clean, dry, and shielded from UV light to preserve its protective properties.
What does the low-air alarm on an SCBA indicate to the firefighter?
Answer: Air supply is running low and exit should begin
The low-air alarm warns that remaining air is limited and the firefighter should begin exiting.