Traffic Control and Maintenance of Traffic Flashcards

What FDOT document provides design requirements for Maintenance of Traffic (MOT) on state highway construction projects?

Answer: Both B and C

FDOT Section 102 provides MOT contract requirements, and the Florida MUTCD (based on the federal MUTCD) governs traffic control device design and placement.

What color are warning signs used in work zones on FDOT projects?

Answer: Orange with black legend

Temporary traffic control warning signs in work zones use an orange background with black legend, distinguishing them from permanent yellow warning signs.

According to FDOT MOT requirements, who must sign and seal the Maintenance of Traffic plan for complex traffic control situations?

Answer: A Florida Professional Engineer (PE)

Complex MOT plans must be designed and signed by a Florida Professional Engineer (PE) to ensure proper engineering judgment is applied.

What is the minimum distance that the first advance warning sign must be placed from the start of a lane closure taper on a 55 mph rural highway?

Answer: 1,000 feet

At 55 mph on rural highways, the Florida MUTCD requires advance warning signs to be placed approximately 1,000 feet from the taper to give drivers adequate response time.

What type of traffic control device marks the edge of a lane closure taper in an FDOT work zone?

Answer: Cones and/or drums

Traffic cones and/or drums are used to delineate lane closure tapers in FDOT work zones, providing visible guidance for drivers.

According to Florida law and FDOT requirements, what happens to fines for moving violations committed within a designated work zone?

Answer: Fines are doubled when workers are present

Florida law doubles fines for moving violations committed in designated work zones when workers are present, to deter dangerous driving.