FCE Return-to-Work Planning & Job Demands Flashcards
6 cards from real FCE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 FCE Return-to-Work Planning & Job Demands flashcards as text
Which classification system is commonly used in the US to describe physical demand levels of occupations for FCE comparison?
Answer: Dictionary of Occupational Titles (DOT) physical demand categories
The DOT physical demand categories (Sedentary, Light, Medium, Heavy, Very Heavy) provide a standardized framework for comparing FCE results to occupational requirements.
In return-to-work planning following an FCE, what does 'transitional work' refer to?
Answer: Temporary modified duties that accommodate current functional limitations while the worker recovers
Transitional work provides temporary modified or alternative duties that match the worker's current FCE-defined capacity while allowing gradual progression toward full-duty return.
What is the primary document produced after an FCE that guides return-to-work decisions?
Answer: FCE summary report with functional capacity findings and work recommendations
The FCE summary report documents the worker's measured capacities, compares them to job demands, and provides objective work recommendations to guide return-to-work planning.
Which US federal law is most directly relevant when an FCE is used to determine reasonable accommodation for return to work?
Answer: Americans with Disabilities Act (ADA)
The ADA requires employers to provide reasonable accommodations for qualified individuals with disabilities, and FCE results can help define the functional limitations that accommodations must address.
What does a 'job demands analysis' provide in relation to FCE outcomes?
Answer: An objective description of the physical, cognitive, and environmental demands of a specific job
A job demands analysis provides an objective, task-by-task breakdown of what a specific job requires physically and cognitively, enabling direct comparison with FCE results.
When FCE results indicate a worker can perform 'medium' physical demand work, what is the maximum occasional lift typically associated with this category per DOT standards?
Answer: 50 lbs
According to DOT standards, the Medium physical demand level involves occasional lifting of up to 50 lbs and frequent lifting of up to 25 lbs.