Hot Work Permit Procedures Flashcards
7 cards from real F60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Hot Work Permit Procedures flashcards as text
Under FDNY rules, how far must combustible materials be moved from the hot work area before a permit is valid?
Answer: At least 35 feet
FDNY requires all combustible materials to be moved at least 35 feet from the hot work zone, or protected with fire-resistant blankets, before a permit is considered valid.
What must be done with openings such as doorways and windows near a torch operation area?
Answer: They must be sealed with fire-resistant material and noted on the permit
Openings can allow sparks and heat to travel to adjacent areas, so they must be sealed with fire-resistant covers and this action documented on the permit.
A hot work permit for torch operations in a confined space requires what additional documentation?
Answer: A separate confined space entry permit
Confined space entry has its own permit requirements that must accompany the hot work permit when torch operations occur in confined spaces.
Who must physically sign the hot work permit to authorize work to begin?
Answer: The building owner or authorized manager and the fire guard
Both the issuing authority (owner or manager) and the fire guard must sign the permit, confirming conditions have been inspected and authorization granted.
What does the 'fire watch duration' section of a hot work permit specify?
Answer: The minimum period the fire guard must monitor the area after hot work stops
The fire watch duration section specifies how long monitoring must continue after operations cease, typically at least 60 minutes, to catch smoldering fires.
If a torch operation produces sparks that fall below the work level, the permit must require:
Answer: A fire watch on the floor below as well
Sparks falling to lower levels can ignite materials there, so a fire watch must be posted on the floor below and documented on the permit.
What happens to a hot work permit if the fire guard leaves the site during active torch operations?
Answer: The permit is automatically suspended and work must stop
The fire guard's continuous presence is a permit condition; departure automatically suspends the permit and all hot work must cease.