Hot Work Permit Procedures Flashcards
7 cards from real F60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Hot Work Permit Procedures flashcards as text
Who is authorized to issue a hot work permit for torch operations in New York City?
Answer: The building owner or their designated representative
A hot work permit must be issued by the building owner or their authorized representative, not the fire guard performing the work.
What is the maximum duration typically allowed for a single hot work permit before it must be renewed?
Answer: One shift or one day
A hot work permit is typically valid for one shift or one work day and must be renewed if work continues beyond that period.
Before signing the hot work permit, the fire watch must verify that:
Answer: A fire extinguisher is fully charged and within reach of the work area
A fully charged, appropriate fire extinguisher must be immediately accessible before any hot work begins and before signing the permit.
When torch operations are conducted near a sprinkler head, what precaution is required on the hot work permit?
Answer: Temporary shielding must be used and noted on the permit
Temporary shielding protects sprinkler heads from heat activation and must be documented on the permit as a required precaution.
What action must be taken if hot work must continue into a second shift?
Answer: A new permit must be issued and signed for the second shift
Each new shift requires a fresh permit with all conditions re-evaluated and re-signed by the authorized issuing party.
Which section of the hot work permit specifically addresses the condition of the work area before operations begin?
Answer: Pre-work inspection checklist
The pre-work inspection checklist on the permit confirms combustibles are cleared, fire suppression is available, and conditions are safe.
If a hot work permit is voided mid-operation due to unsafe conditions, what must happen?
Answer: All hot work must cease immediately until a new permit is issued after conditions are corrected
Voiding a permit requires full cessation of hot work; operations cannot resume until hazards are corrected and a new permit is properly issued.