Practice Test GeeksF02 - NYC Fire Guard F-02 Practice Test
← All F02 Flashcard Decks

F02 Fire Extinguisher Operations Flashcards

6 cards from real F02 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 F02 Fire Extinguisher Operations flashcards as text

  1. Which class of fire extinguisher is rated for use on electrical equipment fires?

    Answer: Class C

    Class C extinguishers are designed for energized electrical equipment fires because they use non-conductive agents.

  2. What does the PASS technique stand for when using a fire extinguisher?

    Answer: Pull, Aim, Squeeze, Sweep

    PASS stands for Pull the pin, Aim at the base, Squeeze the handle, and Sweep side to side.

  3. How close should you be to a fire before discharging a portable extinguisher?

    Answer: 6–8 feet

    Operators should position themselves 6–8 feet from the fire to stay within the extinguisher's effective range while maintaining safety.

  4. What indicates a fire extinguisher needs immediate recharging or replacement?

    Answer: The pressure gauge needle is in the red zone

    A gauge needle in the red zone indicates the extinguisher is under- or over-pressurized and not ready for use.

  5. How often must portable fire extinguishers in NYC be inspected by a qualified person?

    Answer: Annually

    NYC Fire Code requires that portable extinguishers receive a thorough annual inspection by a qualified person.

  6. A dry chemical extinguisher is NOT suitable for which type of fire?

    Answer: Class K commercial cooking grease fire

    Class K fires from cooking grease require a wet chemical extinguisher specifically formulated for high-temperature fat fires.