F02 F02 Standpipe and Hose Systems 3

Question 1

What is the minimum hose thread standard used for NYC standpipe connections?

Accepted Answer

National Standard Thread (NST) 2.5-inch

Answer

NYC standpipe hose outlets use 2.5-inch National Standard Thread (NST) to ensure compatibility with FDNY hose couplings.

Question 2

During a fire incident, a Fire Guard's role regarding the standpipe system is to:

Accepted Answer

Guide firefighters to hose cabinet locations and keep access clear

Answer

Fire Guards direct FDNY personnel to standpipe hose cabinet locations and ensure pathways remain clear, but do not operate the system themselves during active firefighting.

Question 3

What does a closed gate valve on a standpipe riser indicate?

Accepted Answer

The system is out of service and requires immediate notification to FDNY

Answer

A closed gate valve on a standpipe riser takes that portion of the system out of service, which must be immediately reported to FDNY and building management.

Question 4

Standpipe hose in a Class II station should be which type for occupant use?

Accepted Answer

1.5-inch lined hose on a rack or reel

Answer

Class II occupant hose stations use 1.5-inch lined hose stored on a rack or reel, sized and designed for use by trained building occupants.

Question 5

How should a Fire Guard respond if water is observed leaking from a standpipe hose cabinet?

Accepted Answer

Immediately notify building management and the fire department of a possible system impairment

Answer

Any water leak from a standpipe component suggests a possible system failure or valve problem that constitutes an impairment requiring immediate notification.

F02 - NYC Fire Guard F-02 Practice Test

F02 - NYC Fire Guard F-02 Practice Test

F02 F02 Standpipe and Hose Systems 3