Fire Alarm Systems and Notification Procedures Flashcards
7 cards from real F-03 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fire Alarm Systems and Notification Procedures flashcards as text
When a fire alarm activates at a place of assembly, what is the Fire Guard's FIRST priority?
Answer: Notify occupants and begin evacuation procedures
The Fire Guard's first priority upon alarm activation is to notify occupants and initiate evacuation, as life safety takes precedence over all other actions.
Which of the following best describes the purpose of a manual pull station in a fire alarm system?
Answer: It allows any person to manually initiate a fire alarm signal
A manual pull station allows any building occupant to manually trigger the fire alarm system to alert others to a fire emergency.
A fire alarm has sounded and the Fire Guard investigates but finds no fire. What should the Fire Guard do?
Answer: Notify FDNY and log the event in the logbook
Even if no fire is found, the Fire Guard must notify FDNY of the alarm activation and record the event in the logbook as required by NYC Fire Code.
Under NYC Fire Code, who is responsible for maintaining fire alarm systems in a place of assembly in working order?
Answer: The building owner or operator
The building owner or operator is legally responsible for ensuring all fire protection systems, including fire alarm systems, are maintained in proper working order.
What does a 'trouble signal' on a fire alarm control panel indicate?
Answer: A system fault or supervisory condition requiring attention
A trouble signal indicates a fault or supervisory condition within the fire alarm system itself, such as a wiring issue or disabled device, that requires attention.
How should a Fire Guard respond if the fire alarm control panel shows a 'supervisory' signal?
Answer: Investigate the cause and notify the appropriate party, then log the event
A supervisory signal indicates a condition that may impair the fire protection system, so the Fire Guard must investigate, notify the appropriate party, and document the event.
Which type of fire alarm detector is most commonly triggered by visible particles of combustion?
Answer: Smoke detector
Smoke detectors are designed to sense visible or invisible particles of combustion, making them the most common detector activated by smoke from a fire.