Pre-Event, During-Event, and Post-Event Safety Checks Flashcards
6 cards from real F-03 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Pre-Event, During-Event, and Post-Event Safety Checks flashcards as text
What is the FIRST thing an F-03 fire guard should do upon arriving at a venue before an event?
Answer: Conduct a complete walkthrough to identify and correct any fire hazards
The fire guard's first action should be a thorough pre-event walkthrough of the entire venue to identify fire hazards, verify exit accessibility, and confirm fire protection equipment is operational.
During a pre-event check, a fire guard finds that 2 of 6 fire extinguishers are discharged. What action is required?
Answer: Notify management for immediate replacement before the event begins
Discharged extinguishers must be replaced or recharged before the event. The fire guard should notify management immediately to ensure all required extinguishers are operational.
During an event, what should a fire guard specifically monitor regarding aisles?
Answer: That aisles remain clear and unobstructed at all times
Aisles must remain clear and unobstructed at all times during an event. Chairs, equipment, personal belongings, or standing patrons must not block egress paths.
After an event ends and patrons have left, what should the fire guard do?
Answer: Conduct a post-event walkthrough to check for smoldering materials, hazards, and remaining occupants
A post-event walkthrough ensures no smoldering materials, hidden fires, or trapped occupants remain. The fire guard checks all areas before securing the venue.
During a pre-event check, the fire guard finds that the fire alarm system shows a 'supervisory' signal. What does this mean?
Answer: A component is in an abnormal condition (e.g., a valve is closed)
A supervisory signal indicates that a monitored component is in an abnormal state, such as a sprinkler valve being partially closed. This requires investigation and correction.
What should a fire guard check regarding the stage area during a pre-event walkthrough?
Answer: Flame-resistant curtains, clear exits, proper spacing from heat sources, and no overloaded electrical circuits
The stage area requires checking that curtains/drapes are flame-resistant, exits are clear, scenery is positioned safely away from heat/lighting, and electrical circuits aren't overloaded.