Equipment and Systems Flashcards

A sprinkler head activates during an event. What should the fire guard do?

Answer: Begin evacuation, notify FDNY, and do not shut off sprinklers unless directed by FDNY

Sprinkler activation indicates a fire condition. The fire guard should evacuate occupants and call 911. Sprinklers should not be shut off unless directed by FDNY, as they may be suppressing a fire.

What does a 'trouble' signal on a fire alarm control panel indicate?

Answer: A system malfunction requiring attention

A trouble signal indicates a malfunction in the fire alarm system, such as a broken wire, low battery, or disabled device. It requires prompt attention to restore the system to full functionality.

Where should fire extinguishers be located in a place of assembly?

Answer: Along paths of travel, near exits, and in visible, accessible locations

Fire extinguishers must be placed along normal paths of travel, near exits, in visible and accessible locations, and within the maximum travel distance specified by fire code.

What is the maximum travel distance to a fire extinguisher for Class A (ordinary combustibles) hazards?

Answer: 75 feet

For Class A hazards, the maximum travel distance to a fire extinguisher is 75 feet. This ensures anyone in the building can reach an extinguisher quickly.

Emergency lighting in a place of assembly must remain operational for a minimum of how long?

Answer: 90 minutes

Emergency lighting must provide illumination for at least 90 minutes (1.5 hours) after a power failure to allow for safe evacuation and FDNY operations.

A fire guard notices that an exit sign is not illuminated. What action should they take?

Answer: Report it to building management for immediate repair

Non-functioning exit signs must be reported to building management for immediate repair. The fire guard should note it in their log and may need to post personnel near the exit to direct occupants.