Practice Test Geeks(F-03) Fire Guard F-03 Practice Test
← All F-03 Flashcard Decks

Standpipe and Sprinkler Systems in Construction Flashcards

6 cards from real F-03 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Standpipe and Sprinkler Systems in Construction flashcards as text

  1. What action must be taken when a sprinkler head on a construction site is accidentally damaged?

    Answer: Immediately shut down that sprinkler zone, notify FDNY of the impairment, and implement fire watch

    A damaged sprinkler head creates a system impairment that requires FDNY notification and compensatory fire watch until repairs are made.

  2. What is the required water flow test pressure for a temporary standpipe system on an NYC construction site?

    Answer: 25 psi minimum at the highest outlet when flowing 250 gpm

    Temporary standpipes must demonstrate a minimum of 25 psi residual pressure at the topmost outlet while flowing 250 gpm.

  3. An FDNY Siamese connection is visible on the exterior of a building under construction. What is its purpose?

    Answer: Allows FDNY pumper trucks to supplement water pressure in the standpipe or sprinkler system

    Siamese connections allow FDNY pumper trucks to boost water pressure in standpipe and sprinkler systems during fire operations.

  4. What is a 'dry pipe' standpipe system and when is it used on construction sites?

    Answer: A standpipe filled with compressed air instead of water, used in unheated spaces to prevent freezing

    Dry pipe standpipes are pressurized with air and connected to water supply via a dry valve — used in unheated construction areas where wet pipe systems would freeze.

  5. What compensatory measures are required when a standpipe system is taken out of service for repairs on a construction site?

    Answer: Implement continuous fire watch by qualified personnel covering the unprotected area

    Continuous fire watch by qualified personnel is required to compensate for a standpipe impairment — the watch covers the area that lacks fire suppression protection.

  6. What information must an F-03 fire guard know about the standpipe system on their assigned construction site?

    Answer: The location of all standpipe hose connections, main shutoff valves, and fire department connections

    The F-03 fire guard must know all standpipe component locations to guide FDNY during emergencies and to detect impairments during inspections.