Practice Test Geeks(F-02) Fireguard Practice Test
← All F-02 Flashcard Decks

Basic Flashcards

7 cards from real F-02 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Basic flashcards as text

  1. Under FDNY regulations, how often must a Certificate of Fitness holder conduct a fire safety inspection of their premises?

    Answer: At least once per day during working hours

    Certificate of Fitness holders are required to inspect their premises at least once per day during working hours to identify and correct fire hazards.

  2. Which of the following actions should a fireguard take if they discover a fire exit is blocked by stored merchandise?

    Answer: Immediately have the obstruction removed and report the violation

    Blocked exits are an immediate life-safety hazard and must be cleared right away, with the violation documented and reported to the appropriate authority.

  3. What is the primary purpose of maintaining a fire watch log?

    Answer: To document that inspections were conducted and any hazards found or corrected

    The fire watch log provides a written record proving that required inspections occurred and notes any fire hazards discovered and corrective actions taken.

  4. A fireguard notices smoke coming from under a closed door. What is the FIRST action to take?

    Answer: Activate the fire alarm and call 911

    Activating the alarm and calling 911 ensures occupants are alerted and the fire department is dispatched immediately before investigating or attempting suppression.

  5. Which class of fire extinguisher is specifically designed for use on electrical equipment fires?

    Answer: Class C

    Class C extinguishers use non-conductive agents and are rated for energized electrical equipment fires.

  6. When should a fireguard notify the FDNY about a condition that poses an immediate fire danger?

    Answer: Immediately

    Conditions posing an immediate fire danger must be reported to the FDNY immediately, without waiting for management authorization.

  7. Which of the following is a common ignition source that a fireguard should watch for during inspections?

    Answer: Overloaded electrical extension cords

    Overloaded extension cords can overheat and arc, creating an ignition source and are a frequent cause of workplace fires.