F-01 F-01 Fireguard Sprinkler and Suppression Systems 1

Question 1

What is the primary purpose of an automatic sprinkler system in a building?

Accepted Answer

To control or extinguish a fire in its early stages

Answer

Automatic sprinkler systems are designed to control or extinguish fires in their early stages, limiting fire spread before the FDNY arrives.

Question 2

When a sprinkler system is taken out of service, who must the F-01 Fireguard notify?

Accepted Answer

The FDNY and the building management

Answer

When a sprinkler system is impaired, the Fireguard must notify both the FDNY and building management as part of proper impairment procedures.

Question 3

What type of sprinkler head activates when heat melts a fusible link or breaks a glass bulb?

Accepted Answer

Automatic sprinkler head

Answer

Automatic sprinkler heads activate individually when heat from a fire melts a fusible link or breaks a glass bulb, releasing water only at that location.

Question 4

In a wet-pipe sprinkler system, the pipes are filled with:

Accepted Answer

Water under pressure

Answer

Wet-pipe sprinkler systems keep the pipes constantly filled with pressurized water, allowing for immediate discharge when a sprinkler head activates.

Question 5

What should a Fireguard do if he or she discovers that a sprinkler head has been painted over?

Accepted Answer

Document it in the fire watch log and report it to building management

Answer

A painted-over sprinkler head is a deficiency that must be documented in the fire watch log and reported to building management for correction by a licensed professional.

(F-01) F-01 Fireguard Practice Test

(F-01) F-01 Fireguard Practice Test

F-01 F-01 Fireguard Sprinkler and Suppression Systems 1