F-01 F-01 Fireguard FDNY Regulations and Logs 4

Question 1

A building is undergoing hot work (welding/cutting). How long after hot work ends must the fireguard maintain a fire watch at the work site?

Accepted Answer

30 minutes

Answer

FDNY requires a fire watch to be maintained for at least 30 minutes after hot work operations have ended.

Question 2

What does the fireguard log entry 'all clear' signify after a tour?

Accepted Answer

No fire hazards, obstructions, or unsafe conditions were found

Answer

An 'all clear' entry means the fireguard completed the tour and found no fire hazards, blocked exits, or unsafe conditions.

Question 3

Which statement about fire doors in a building under fire watch is correct?

Accepted Answer

They must remain closed and self-closing mechanisms must be operational

Answer

Fire doors must remain closed and their self-closing mechanisms must be maintained in proper working order at all times.

Question 4

A fireguard on duty at an assembly hall notices the occupancy load sign shows 300 persons but over 400 people are inside. What should they do?

Accepted Answer

Immediately notify the building manager and, if unresolved, call FDNY

Answer

Overcrowding beyond posted occupancy limits is a life-safety violation requiring immediate notification to building management and FDNY if not corrected.

Question 5

The FDNY certificate of fitness for a fireguard must be carried by the fireguard at all times while on duty. What happens if they cannot produce it when requested by an FDNY officer?

Accepted Answer

They may be subject to summons and the watch may be considered unstaffed

Answer

Failure to produce the certificate of fitness on demand can result in a summons and the fire watch position considered unstaffed.

(F-01) F-01 Fireguard Practice Test

(F-01) F-01 Fireguard Practice Test

F-01 F-01 Fireguard FDNY Regulations and Logs 4