Pilot Car Operations & Load Escort Techniques Flashcards
7 cards from real EVOC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Pilot Car Operations & Load Escort Techniques flashcards as text
When approaching a low-clearance structure such as a bridge or overpass, the escort vehicle operator's first action should be to:
Answer: Stop traffic and verify the structure's clearance against the load's height
Before the load approaches any low-clearance structure, the escort operator must confirm the posted clearance matches or exceeds the load's height to prevent a strike.
What is the purpose of a 'high-pole' (height pole or clearance bar) mounted on an escort vehicle?
Answer: To physically test overhead clearance before the tall load passes underneath
A height pole (high-pole) is set to the same height as the tallest point of the load so the escort vehicle can physically test and confirm vertical clearance before the load passes.
During a narrow passage where only one lane is passable, the escort vehicle operator should:
Answer: Stop oncoming traffic and radio the driver to proceed slowly
The escort operator must stop oncoming traffic and coordinate with the transport driver via radio before guiding the load through a one-lane or narrow passage.
At railroad crossings, what is the escort vehicle operator required to do?
Answer: Stop, check for trains, and ensure no train is approaching before allowing the load to cross
The escort vehicle must stop at rail crossings, look and listen for approaching trains in both directions, and confirm it is safe before signaling the transport to cross.
When the oversize load is making a wide right turn at an intersection, where should the rear escort vehicle be positioned?
Answer: Blocking the intersection to stop cross traffic until the load completes the turn
During a wide turn, the rear escort vehicle should block the intersection to prevent cross traffic from entering until the oversize load has safely completed the maneuver.
What information must escort vehicle operators consistently communicate to each other during transport?
Answer: Road conditions, upcoming hazards, clearance checks, and load status
Continuous radio communication between all escort operators and the transport driver about road conditions, hazards, clearances, and load status is essential for safe operations.
Which of the following is the correct action when an escort vehicle operator discovers the permitted route has a road closure not indicated on the permit?
Answer: Stop the transport and contact the permit agency or law enforcement for guidance
An unplanned road closure requires the escort to halt the transport and contact the permitting agency or law enforcement since the alternate route may also require a permit or inspection.