ESC ESC Arc Flash & PPE Selection 1

Question 1

What causes an arc flash event?

Accepted Answer

An electrical arc traveling through ionized air between conductors or to ground

Answer

An arc flash occurs when an electrical arc travels through ionized air between conductors or from a conductor to ground, releasing tremendous thermal and blast energy.

Question 2

Which NFPA standard provides the requirements for arc flash hazard analysis and electrical safety in the workplace?

Accepted Answer

NFPA 70E

Answer

NFPA 70E, Standard for Electrical Safety in the Workplace, establishes the requirements for arc flash hazard analysis and safe work practices.

Question 3

In what units is incident energy from an arc flash measured?

Accepted Answer

Calories per square centimeter (cal/cm²)

Answer

Incident energy from arc flash is measured in calories per square centimeter (cal/cm²), representing the thermal energy density at a given distance from the arc.

Question 4

The arc flash boundary is defined as the distance at which incident energy equals:

Accepted Answer

1.2 cal/cm²

Answer

The arc flash boundary is the distance from the arc source at which incident energy equals 1.2 cal/cm², representing the onset of a second-degree burn on unprotected skin.

Question 5

What minimum arc rating is required for PPE Category 1 per NFPA 70E?

Accepted Answer

4 cal/cm²

Answer

NFPA 70E Table 130.5(G) specifies that PPE Category 1 requires a minimum arc rating of 4 cal/cm².

(ESC) Electrical Safety Certification Practice Test

(ESC) Electrical Safety Certification Practice Test

ESC ESC Arc Flash & PPE Selection 1