EMP Emergency Response & Preparedness 2

Question 1

Which NFPA standard specifically addresses emergency power supply systems (EPSS) for life safety?

Accepted Answer

NFPA 110

Answer

NFPA 110 covers emergency and standby power systems, including installation, testing, and maintenance requirements for EPSS.

Question 2

During a grid outage, a facility's backup generator fails to start. What is the FIRST corrective action an energy manager should take?

Accepted Answer

Check fuel level and battery charge on the generator

Answer

Fuel depletion and a discharged starting battery are the most common causes of generator failure to start and should be checked immediately.

Question 3

An Automatic Transfer Switch (ATS) is set to a 10-second transfer delay. What is the PRIMARY reason for this delay?

Accepted Answer

To let the generator reach stable voltage and frequency before connecting loads

Answer

The transfer delay ensures the generator reaches rated speed, voltage, and frequency before loads are switched to prevent equipment damage.

Question 4

What does the term 'islanding' refer to in the context of distributed energy resources during emergencies?

Accepted Answer

Isolating a facility from the grid while continuing to generate power locally

Answer

Islanding occurs when a distributed generator continues to power a local grid section while disconnected from the main utility grid.

Question 5

Under OSHA 29 CFR 1910.38, which document must a facility maintain to ensure employees know emergency procedures?

Accepted Answer

Emergency Action Plan (EAP)

Answer

OSHA 29 CFR 1910.38 requires employers to have a written Emergency Action Plan detailing evacuation, shelter-in-place, and response procedures.

(EMP) Energy Management Professional Practice Test