Electrician Safety and OSHA Requirements 1

Question 1

What OSHA standard covers electrical safety requirements for general industry?

Accepted Answer

29 CFR 1910.303

Answer

OSHA 29 CFR 1910.303 through 1910.399 covers electrical safety standards for general industry workplaces.

Question 2

What is the purpose of Lockout/Tagout (LOTO) procedures?

Accepted Answer

To prevent accidental energization of equipment during maintenance

Answer

LOTO procedures ensure that hazardous energy sources are isolated and locked out before workers perform maintenance or servicing.

Question 3

What is the minimum approach distance for unqualified workers near exposed energized conductors at 120-240V?

Accepted Answer

They must not approach — area must be guarded

Answer

Unqualified workers must not work on or near exposed energized conductors; the area must be guarded or barricaded to prevent their approach.

Question 4

What does PPE stand for in electrical safety?

Accepted Answer

Personal Protective Equipment

Answer

PPE stands for Personal Protective Equipment, which includes items like rubber gloves, face shields, and arc flash suits.

Question 5

What is an arc flash hazard?

Accepted Answer

A sudden release of energy caused by an electrical fault that produces extreme heat and blast pressure

Answer

An arc flash is a dangerous electrical explosion that releases intense heat (up to 35,000°F), light, pressure, and molten metal.

Electrician Practice Test