EIT - Engineer In Training Ethics and Professional Practice Questions and Answers

Question 1

An engineer is the lead designer for a new pedestrian bridge. The project manager, under pressure to meet a tight deadline, instructs the engineer to approve a design that uses a lower grade of steel than specified in the original, approved plans. The engineer's analysis shows the lower-grade steel meets the minimum safety requirements by a very small margin but significantly reduces the bridge's expected lifespan and durability. Which of the following is the engineer's most ethical course of action?

Accepted Answer

Refuse to approve the design and report the situation to the appropriate regulatory agency and their employer.

Answer

According to the NSPE Code of Ethics, engineers shall hold paramount the safety, health, and welfare of the public. While the design with the lower-grade steel may technically meet minimum safety standards, it compromises the long-term integrity and safety of the structure. Informing the employer and the relevant regulatory body is the correct action to protect the public. Simply documenting concerns or shifting the decision to the client does not fulfill the engineer's primary ethical duty.

Question 2

An engineer is retained as an expert witness in a lawsuit. During their investigation, they discover a piece of information that is detrimental to their client's case. According to the NCEES Model Rules of Professional Conduct, what is the engineer's obligation?

Accepted Answer

To present all relevant information discovered during their investigation in a truthful and objective manner.

Answer

Engineers, when serving as expert witnesses, must be objective and truthful. Their duty is to the court and to the truth, not solely to the client who hired them. The NSPE Code of Ethics states that engineers shall issue public statements only in an objective and truthful manner. Withholding relevant information, even if it is unfavorable, would be a violation of this principle.

Question 3

Which of the following situations represents a clear conflict of interest for a professional engineer?

Accepted Answer

Serving on a city planning commission while their firm has a contract to design a public park for the same city.

Answer

A conflict of interest occurs when an engineer's professional judgment could be influenced by a secondary interest. Serving on a commission that makes decisions affecting a project their own firm is working on creates a direct conflict. The engineer's decisions on the commission could financially benefit their firm. The other options do not represent inherent conflicts of interest, although they could depending on specific circumstances.

Question 4

An engineer discovers a flaw in a product design that could potentially cause harm to users, but only under a rare set of circumstances. Their supervisor reviews the findings and decides the risk is acceptably low and that a product recall is not necessary due to the high cost. The engineer strongly disagrees. What is the engineer's primary responsibility in this situation?

Accepted Answer

To report the safety concerns through the company's internal channels and, if necessary, to the appropriate regulatory authorities.

Answer

The primary ethical obligation of an engineer is to protect the public's safety, health, and welfare. If a professional judgment is overruled in a way that endangers the public, the engineer must notify their employer and, if the situation is not rectified, the appropriate authorities. While resigning or leaking to the media are possible actions, the most professional and ethical first step is to use the established internal and external reporting channels.

Question 5

An engineer is asked to sign and seal a set of drawings. The majority of the design work was performed by a subordinate engineer under their direct supervision. The supervising engineer has thoroughly reviewed and approved all aspects of the design. Is it ethical for the supervising engineer to seal these drawings?

Accepted Answer

Yes, because the work was performed under their direct supervisory control and they have verified its adequacy.

Answer

Engineering licensure laws and codes of ethics permit a licensed engineer to sign and seal documents that were prepared by others under their direct supervision and control. The key elements are 'direct supervision' and the supervising engineer's full professional responsibility for the work. The subordinate does not need to be licensed, as the supervising P.E. is taking responsibility for the design's integrity and accuracy.

(EIT) Engineer In Training Certification Practice Test

(EIT) Engineer In Training Certification Practice Test

EIT - Engineer In Training Ethics and Professional Practice Questions and Answers