โ† All EIFS Flashcard Decks

Safety Standards & Compliance in Construction Flashcards

7 cards from real EIFS practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Safety Standards & Compliance in Construction flashcards as text
  1. Under OSHA 29 CFR 1926, what minimum distance must workers maintain from energized overhead power lines when using scaffolding during EIFS installation?

    Answer: 10 feet

    OSHA requires a minimum 10-foot clearance from energized power lines up to 50kV when workers are on scaffolding.

  2. Which ASTM standard governs the performance requirements for polymer-based finish coats used in EIFS assemblies?

    Answer: ASTM E2568

    ASTM E2568 specifies performance requirements for the exterior finish coat in PB EIFS systems.

  3. What is the primary purpose of a fire-resistive EIFS assembly tested under ASTM E119?

    Answer: Hourly fire endurance rating

    ASTM E119 tests fire endurance of building assemblies and assigns hourly fire resistance ratings.

  4. Which regulation requires contractors installing EIFS on buildings with federal funding to comply with lead paint disturbance rules when the substrate was built before 1978?

    Answer: EPA RRP Rule 40 CFR 745

    The EPA's Renovation, Repair and Painting (RRP) Rule under 40 CFR 745 governs lead paint disturbance during renovation work.

  5. When inspecting an EIFS installation on a high-rise building, which OSHA standard most directly governs the safety of workers using rope descent systems?

    Answer: 29 CFR 1926.502

    OSHA 29 CFR 1926.502 covers fall protection systems including personal fall arrest systems and rope descent systems.

  6. A contractor discovers that EIFS insulation boards contain fibers that may be hazardous during cutting. Which OSHA standard requires providing appropriate respiratory protection?

    Answer: 29 CFR 1926.103

    OSHA 29 CFR 1926.103 specifically addresses respiratory protection requirements in construction environments.

  7. According to IBC Section 1403, EIFS used on buildings over what height must comply with additional water-resistive barrier requirements?

    Answer: 30 feet

    IBC Section 1403.2 requires drainage provisions for EIFS assemblies on buildings over 30 feet in height.