Tool Recognition and Use Flashcards

Which tool is used to measure the diameter of a wire rope in elevator systems?

Answer: Micrometer caliper

A micrometer caliper provides precise diameter measurements of wire rope to verify it meets specification.

A mechanic needs to cut a steel guide rail to length on-site. Which tool is most appropriate?

Answer: Angle grinder with cut-off wheel

An angle grinder with a metal cut-off wheel efficiently cuts steel guide rails to the required length.

What is the correct tool to use when installing and tensioning elevator traveling cables?

Answer: Come-along ratchet puller

A come-along ratchet puller allows controlled tensioning of traveling cables during installation.

Which instrument is used to verify that an elevator car sill is level?

Answer: Spirit level

A spirit level with a bubble vial is used to confirm the car sill is perfectly horizontal.

When tightening guide rail clips to a building beam, which tool delivers the correct specified torque?

Answer: Torque wrench

A torque wrench allows the technician to apply the exact torque value specified by the manufacturer.

What tool is used to lubricate guide rails uniformly on an elevator?

Answer: Grease gun with rail lubrication attachment

A grease gun with a rail lubrication attachment applies lubricant evenly along the full length of the guide rail.

Which tool is best suited for pulling wire through conduit during elevator electrical installation?

Answer: Fish tape (snake)

Fish tape is a long flexible steel ribbon fed through conduit to pull electrical wire back through.