EIAT Reading Comprehension and Technical Documents Flashcards
6 cards from real EIAT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 EIAT Reading Comprehension and Technical Documents flashcards as text
A passage reads: 'The term rated speed describes the designed speed of the elevator car and its rated load in the up direction.' In which direction is rated speed measured?
Answer: Up
The passage explicitly states that rated speed is defined as the designed speed in the up direction.
An instruction sheet says: 'Before performing any adjustments, ensure the main line disconnect is open and tagged per lockout/tagout procedures.' What must happen before making adjustments?
Answer: Open the main line disconnect and apply lockout/tagout
The instruction requires opening the main line disconnect and applying lockout/tagout tags as a safety prerequisite before any adjustment.
A passage states: 'Traction elevators use ropes running over a drive sheave, and friction between the ropes and sheave provides the driving force.' What provides the driving force in a traction elevator?
Answer: Friction between ropes and the drive sheave
The passage states that friction between the ropes and the drive sheave provides the driving force.
A work order states: 'Inspect buffer oil level; top off if below the minimum mark on the dipstick.' The oil level is exactly at the minimum mark. What should the technician do?
Answer: Leave it as-is since it is at, not below, the minimum mark
The instruction says to add oil only if the level is below the minimum mark; being exactly at the mark does not trigger the top-off action.
A regulation reads: 'No person shall occupy an elevator car during any test that involves operation of the car with the safety device activated.' Who is prohibited from being in the car during such a test?
Answer: Any person
The phrase 'no person' is an absolute prohibition covering everyone without exception.
A passage reads: 'Hydraulic elevators use a pump and fluid to raise the car; the car descends by releasing fluid back to the reservoir through a control valve.' How does a hydraulic elevator car descend?
Answer: Fluid is released back to the reservoir through a control valve
The passage states descent occurs by releasing fluid back to the reservoir through a control valve, not by reversing the pump.