Generator Load Management & Power Quality Flashcards
6 cards from real EGSA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Generator Load Management & Power Quality flashcards as text
What is the purpose of a transfer switch in a standby generator system?
Answer: To safely switch the electrical load between the utility power source and the generator
A transfer switch isolates the generator from the utility and safely transfers the electrical load, preventing backfeed (sending generator power onto utility lines) which could endanger utility workers.
What is 'block loading' and why is it a concern for generator operation?
Answer: Applying a large electrical load all at once, which can cause voltage and frequency dips
Block loading applies a large percentage of the generator's rated load simultaneously, causing sudden demand that can result in voltage sags, frequency drops, and potential engine stalling if the generator cannot respond quickly enough.
What does the term 'power factor' mean in generator applications?
Answer: The ratio of real power (kW) to apparent power (kVA), indicating how efficiently electrical power is being used
Power factor (PF) measures how efficiently electrical power is used. A PF of 1.0 means all power is real (useful) power. Most generators are rated at 0.8 PF, meaning 80% of apparent power is real power.
What is the standard frequency for electrical power generation in the United States?
Answer: 60 Hz
The US electrical grid and generators operate at 60 Hz (cycles per second). Most other countries use 50 Hz. Generator governors maintain engine speed to keep output frequency stable at the rated value.
What is the purpose of a governor on a generator engine?
Answer: To regulate engine speed and maintain stable electrical frequency under varying loads
The governor automatically adjusts fuel delivery to maintain consistent engine RPM as electrical loads change. Since frequency is directly tied to engine speed, the governor ensures stable 60 Hz (or 50 Hz) output.
What is the difference between a prime-rated and a standby-rated generator?
Answer: Prime-rated generators can run continuously at full load; standby-rated generators are designed for emergency use with limited annual operating hours
Prime-rated generators are designed for continuous or extended operation as a primary power source. Standby-rated generators are designed for emergency backup with limited annual run hours (typically 200-500 hours per year).