Generator Load Management & Power Quality Flashcards
6 cards from real EGSA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Generator Load Management & Power Quality flashcards as text
What is harmonic distortion in generator power output and why does it matter?
Answer: Distortion of the sine wave caused by non-linear loads, which can damage sensitive equipment
Harmonic distortion occurs when non-linear loads (like variable frequency drives, computers, and LED lighting) distort the generator's sine wave output. Excessive harmonics can overheat windings, damage equipment, and cause operational issues.
What is paralleling in generator systems?
Answer: Connecting two or more generators to work together to supply a common electrical load
Paralleling allows multiple generators to share the electrical load, providing greater capacity, redundancy, and the ability to match generation to actual demand by starting or stopping units as needed.
What conditions must be matched before paralleling two generators?
Answer: Voltage, frequency, phase angle, and phase rotation must all be matched
Before closing the paralleling breaker, both generators must match in voltage magnitude, frequency, phase angle (synchronization), and phase rotation to prevent damaging circulating currents and equipment damage.
What is the purpose of load bank testing for generators?
Answer: To apply a controlled artificial load to verify generator performance and prevent wet stacking
Load bank testing applies a measured resistive, inductive, or combined load to verify the generator can handle its rated capacity and to burn off carbon deposits and unburned fuel (wet stacking) from underloading.
What is 'wet stacking' in diesel generator operation?
Answer: Accumulation of unburned fuel and carbon in the exhaust system due to prolonged operation at light loads
Wet stacking occurs when a diesel generator runs at light loads (below 30% of rated capacity) for extended periods, causing incomplete combustion. Unburned fuel and carbon accumulate in the exhaust, reducing performance and potentially damaging components.
What is the function of an automatic voltage regulator (AVR) in a generator?
Answer: To maintain a constant output voltage by adjusting the excitation current to the generator's field winding
The AVR continuously monitors output voltage and adjusts the DC excitation current supplied to the generator's rotating field winding, maintaining stable voltage regardless of load changes.