EC Electrolysis Equipment and Maintenance 3

Question 1

What type of current is used exclusively in thermolysis (shortwave) electrolysis?

Accepted Answer

Alternating current (AC) at high frequency

Answer

Thermolysis uses high-frequency alternating current (radio frequency), typically 13.56 MHz, which creates heat through molecular oscillation to destroy the hair follicle.

Question 2

When autoclaving electrolysis probes, what is the standard sterilization cycle for a gravity displacement autoclave?

Accepted Answer

121°C (250°F) for 15–20 minutes at 15 psi

Answer

The standard gravity displacement autoclave cycle is 121°C (250°F) at 15 psi for 15–20 minutes, which is sufficient to achieve sterilization of electrolysis instruments.

Question 3

What does a flickering or intermittent current output on an epilator most likely indicate?

Accepted Answer

A loose connection or faulty cord/cable

Answer

Flickering or intermittent output typically signals a loose or damaged connection in the probe cord, footpedal wire, or internal wiring that disrupts current flow.

Question 4

Which of the following probe materials is considered single-use only and is required in most US states?

Accepted Answer

One-piece stainless steel disposable probes

Answer

Most US states require single-use disposable probes to prevent cross-contamination and comply with infection control regulations, making reusable probes non-compliant in those jurisdictions.

Question 5

What is the purpose of the 'intensity' versus 'timing' controls on a blend epilator?

Accepted Answer

Intensity controls current strength; timing controls duration of each current application

Answer

On a blend unit, intensity determines how strong the current is (milliamperage), while timing controls how many seconds each modality is applied per follicle treatment.

(EC) Electrolysis Certification Practice Test

(EC) Electrolysis Certification Practice Test

EC Electrolysis Equipment and Maintenance 3