Standards & Codes Compliance Flashcards
7 cards from real DCI practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 7 Standards & Codes Compliance flashcards as text
Per ANSI/TIA-1005-A, the standard for industrial telecommunications cabling, the harsh environment zone requires cables rated at minimum:
Answer: MICE 3 environmental rating
TIA-1005-A uses the MICE (Mechanical, Ingress, Climatic/Chemical, Electromagnetic) classification; harsh industrial zones require MICE 3 rated components.
A building permit is typically required before installing low-voltage cabling in a commercial building. Who is ultimately responsible for obtaining this permit?
Answer: The installing contractor
The installing contractor is legally responsible for obtaining required building permits before commencing low-voltage cabling work.
According to TIA-568, which cable category is the MINIMUM required for new horizontal cabling installations as of the current standard?
Answer: Category 6
Current TIA-568 revisions require a minimum of Category 6 for new horizontal cabling installations to support modern applications.
NEC Article 770 covers which type of cabling system?
Answer: Optical fiber cables
NEC Article 770 specifically governs optical fiber cables and their installation requirements.
When testing a completed structured cabling installation for TIA-568 compliance, which test result is used to verify channel performance?
Answer: A full suite including NEXT, return loss, insertion loss, and propagation delay
TIA-568 channel qualification requires a comprehensive test suite including NEXT, return loss, insertion loss, delay skew, and propagation delay.
The NEC defines 'plenum' as a space used for environmental air. Which of the following is NOT typically classified as a plenum space?
Answer: A dedicated cable tray in a conduit
A cable tray inside a conduit is not a plenum; plenum refers to environmental air-handling spaces, not enclosed metallic raceways.
Which authority having jurisdiction (AHJ) typically enforces NEC requirements for low-voltage cabling in commercial buildings?
Answer: The local fire marshal or building department
Local fire marshals or building departments act as the AHJ and are responsible for inspecting and enforcing NEC compliance.