Standards & Codes Compliance Flashcards

Which ANSI/TIA standard specifically addresses cabling infrastructure for healthcare facilities?

Answer: ANSI/TIA-1179

ANSI/TIA-1179 covers telecommunications infrastructure for healthcare facilities including hospitals and clinics.

Under NEC Article 800, communications cables installed in a plenum space must be rated as:

Answer: CMP (Plenum)

NEC Article 800 requires CMP-rated cables in plenum air-handling spaces due to their low smoke and flame-spread properties.

The minimum bend radius for a 4-pair UTP horizontal cable during installation (under tension) is typically:

Answer: 8 times the cable diameter

TIA-568 specifies a minimum bend radius of 8 times the cable outer diameter when pulling force is applied during installation.

BICSI TDMM is best described as:

Answer: An industry best-practice reference manual for telecommunications distribution

BICSI's Telecommunications Distribution Methods Manual (TDMM) is an industry reference guide, not a mandatory code.

Which standard defines the structured cabling requirements specifically for data centers?

Answer: ANSI/TIA-942-B

ANSI/TIA-942-B establishes telecommunications infrastructure standards for data centers.

Per OSHA regulations, a ladder must extend at least how far above the top landing when used for roof or elevated access?

Answer: 3 feet

OSHA 29 CFR 1926.1053 requires portable ladders to extend at least 3 feet above the upper landing surface.

The TIA-568 standard classifies channel performance categories. Category 6A supports a bandwidth of up to:

Answer: 500 MHz

Category 6A (Augmented) supports frequencies up to 500 MHz, enabling 10GBASE-T over 100 meters.