Practice Test Geeks(DCI) Data Cabling Installer Practice Test
← All DCI Flashcard Decks

Standards and Codes Flashcards

7 cards from real DCI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Standards and Codes flashcards as text

  1. Which ANSI/TIA standard specifically addresses grounding and bonding requirements for telecommunications systems?

    Answer: ANSI/TIA-607-C

    ANSI/TIA-607-C covers commercial building grounding and bonding requirements for telecommunications infrastructure.

  2. Under ANSI/TIA-568, what is the maximum allowable permanent link length for Category 6A horizontal cabling?

    Answer: 90 meters

    The permanent link (from patch panel to work area outlet) is limited to 90 meters, reserving 10 meters for patch cords in the total 100-meter channel.

  3. Which NEC article governs the installation of communications circuits in commercial buildings?

    Answer: Article 800

    NEC Article 800 covers communications circuits, including telephone, telegraph, and outside wiring for fire and burglar alarms.

  4. ANSI/TIA-569-D specifies the minimum bend radius for a 4-pair UTP cable during installation as:

    Answer: 8 times the cable diameter

    ANSI/TIA-569-D requires a minimum bend radius of 8 times the cable outer diameter during installation to prevent damage to the cable pairs.

  5. What does the 'D' suffix in ANSI/TIA-568.2-D indicate?

    Answer: Fourth revision of the standard

    The letter suffix in TIA standards indicates the revision level, with 'D' representing the fourth revision of that standard document.

  6. According to BICSI standards, what is the recommended minimum clearance between power conductors and data cabling running in parallel?

    Answer: 6 inches

    BICSI recommends a minimum of 6 inches (150mm) of separation between unshielded data cabling and power conductors to reduce electromagnetic interference.

  7. Which organization publishes the TDMM (Telecommunications Distribution Methods Manual) used as a key reference by cabling installers?

    Answer: BICSI

    BICSI (Building Industry Consulting Service International) publishes the TDMM, which is the primary reference manual for telecommunications cabling professionals.