Job Site Safety Practices Flashcards
6 cards from real DCI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Job Site Safety Practices flashcards as text
A data cabling installer is working on a new construction site. Which of the following is the MOST critical piece of Personal Protective Equipment (PPE) to wear when there is a risk of falling objects?
Answer: Hard hat
While all listed items are important forms of PPE, a hard hat is specifically designed to protect the head from impact from falling objects, which is a significant hazard on construction sites.
When setting up a work area in a busy hallway, what is the best practice for ensuring the safety of both the installer and pedestrians?
Answer: Using visible safety barriers like caution tape and A-frame signs to clearly designate the work area.
According to BICSI general safety practices, it is essential to use proper visible safety barriers such as caution tape and folding A-frame signs to designate work areas and restrict access, ensuring that oncoming pedestrians are aware of the work ahead.
An installer needs to work on cabling near an electrical panel. The first and most critical step before starting work to prevent electrical shock is to:
Answer: Disconnect and verify the power is off using a Lockout/Tagout (LOTO) procedure.
The Lockout/Tagout (LOTO) procedure is a critical safety protocol to ensure that electrical circuits are properly shut off and not accidentally re-energized while work is being performed. This involves shutting off the power, locking the disconnecting means, and tagging it to inform others not to operate it.
According to OSHA's Hazard Communication Standard (HCS), what is the primary purpose of a Safety Data Sheet (SDS)?
Answer: To provide detailed information about a hazardous chemical's properties, risks, and safe handling procedures.
OSHA's HCS requires employers to have a Safety Data Sheet (SDS) for each hazardous chemical they use. The SDS provides comprehensive information on the chemical's hazards, handling, storage, and emergency control measures, ensuring workers have the 'right to understand' the risks.
While using an extension ladder to access a ceiling pathway, what is the proper safety protocol regarding the ladder's position?
Answer: The top of the ladder must extend at least three feet above the point of contact.
A key rule for extension ladder safety is that the ladder must extend at least three feet (about 1 meter) above the upper landing surface to provide a secure handhold for climbing on and off.
Which of the following is a primary hazard associated specifically with installing fiber optic cabling that is not a risk with copper cabling?
Answer: Eye damage from invisible light sources.
Fiber optic cables transmit data using light, which can be invisible to the human eye but powerful enough to cause permanent eye damage. Installers must never look directly into the end of a fiber cable and should use appropriate safety measures and tools to inspect them.