CWI Facility Management & Operations Flashcards
6 cards from real CWI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CWI Facility Management & Operations flashcards as text
Which organization provides the primary standards for indoor climbing wall operations and route setting in the United States?
Answer: CWA (Climbing Wall Association)
The Climbing Wall Association (CWA) sets industry standards for indoor climbing facility operations, safety protocols, and staff training in the US.
How often should the primary structural elements (anchors, T-nuts, wall panels) of a climbing wall be formally inspected according to best industry practice?
Answer: At least annually by a qualified inspector, with ongoing daily visual checks by staff
Best practice requires daily visual inspections by trained staff and at least annual formal structural inspections by a qualified professional to catch wear and fatigue.
What is the primary hazard associated with a loose or stripped T-nut on a climbing wall hold?
Answer: Hold detachment under load, creating a fall hazard for the climber
A loose T-nut can allow a hold to spin or pull out under a climber's weight, causing an unexpected fall and potential injury.
When establishing a bouldering area floor padding specification, what ASTM standard applies to the impact attenuation of crash pads used in US indoor facilities?
Answer: ASTM F1292 — impact attenuation for playground surfacing
ASTM F1292 covers impact attenuation requirements for surfacing materials used under play equipment and is widely applied to bouldering crash pad standards in the US.
Which of the following is the correct procedure when a CWI discovers a damaged auto-belay device during a pre-opening inspection?
Answer: Tag the unit out of service, rope it off, and notify the facility manager before opening that station
Any suspect auto-belay device must be immediately taken out of service and physically barricaded to prevent use until it is inspected and cleared by a qualified technician.
What information must be included on a climbing wall facility's liability waiver to be considered enforceable in most US states?
Answer: Clear description of inherent risks, an assumption of risk clause, and a release of liability — signed and dated by the participant
An enforceable waiver must explicitly describe the inherent risks of climbing, include an assumption of risk, and contain a clear release of liability signed by an informed participant.