Electrical Hazards and Utility Line Safety Flashcards
7 cards from real CTSP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Electrical Hazards and Utility Line Safety flashcards as text
Which ANSI standard specifically addresses safety requirements for arboricultural operations, including work near energized electrical conductors?
Answer: ANSI Z133
ANSI Z133 is the American National Standard for Arboricultural Operations and covers safety requirements including proximity to electrical conductors.
What is the minimum approach distance that unqualified workers must maintain from energized overhead electrical lines up to 50kV?
Answer: 10 feet (3.05 m)
OSHA regulations require unqualified workers to maintain at least 10 feet from energized conductors rated up to 50kV.
Which phenomenon describes the voltage difference between two ground contact points at different distances from a downed energized conductor, creating a shock hazard when walking?
Answer: Step potential
Step potential is the voltage gradient along the ground surface radiating from an energized source; current can flow up one leg and down the other if a person's feet are at different potentials.
A 'qualified line-clearance arborist' is primarily distinguished from an unqualified worker by having:
Answer: Training allowing work within the limited approach boundary of energized conductors
A qualified line-clearance arborist has received specific training and demonstrated the ability to work safely within the approach boundaries of energized conductors.
Which type of rope is required when performing rigging operations in close proximity to energized electrical conductors?
Answer: A dielectrically tested rope with low moisture absorption
Ropes used near energized conductors must be dielectrically tested and have low moisture absorption to prevent them from becoming conductive pathways.
When a worker contacts a tree that is simultaneously touching an energized overhead conductor, the primary injury mechanism is:
Answer: Electrocution via a conductive path through the tree and the worker's body to ground
Current flows from the energized conductor through the tree, through the worker's body, and to ground, completing the circuit and causing electrocution.
Utility line-clearance tree work in the United States is primarily governed by which OSHA standard?
Answer: 29 CFR 1910.269
29 CFR 1910.269 governs electric power generation, transmission, and distribution work, including line-clearance tree trimming operations.