Practice Test GeeksCTSP - Certified Treecare Safety Professional Practice Test
← All CTSP Flashcard Decks

Regulatory Compliance (OSHA/Z133) Flashcards

7 cards from real CTSP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Regulatory Compliance (OSHA/Z133) flashcards as text

  1. Under OSHA 29 CFR 1910.269, what is the minimum approach distance (MAD) primarily based on?

    Answer: The voltage of the energized conductor

    MAD is determined by the voltage level of the energized conductor and must be maintained by all workers.

  2. ANSI Z133 requires that before any climbing operation begins, the arborist must conduct what type of assessment?

    Answer: A hazard assessment of the tree and work zone

    ANSI Z133 mandates a hazard assessment to identify risks associated with the tree, surrounding structures, and work zone before climbing.

  3. Which OSHA standard specifically governs the use of chainsaws and personal protective equipment for tree care operations?

    Answer: 29 CFR 1910.266 (Logging Operations)

    29 CFR 1910.266 covers logging operations including chainsaw use and required PPE, which applies to many tree care tasks.

  4. Under ANSI Z133, what must be established around a tree work zone before operations begin?

    Answer: A designated exclusion zone to protect bystanders

    ANSI Z133 requires establishing an exclusion zone that keeps unauthorized persons a safe distance from falling debris and equipment.

  5. An employer discovers a worker has not received OSHA-required training for operating a wood chipper. Under OSHA 29 CFR 1910.266, what is the correct course of action?

    Answer: Remove the worker from chipper duties until training is completed

    OSHA requires workers to be trained before operating hazardous equipment; untrained workers must not be assigned those duties.

  6. ANSI Z133 classifies a tree as a 'hazard tree' when it has a condition that poses an unacceptable risk. Who is responsible for identifying hazard trees on a job site?

    Answer: A qualified arborist or competent person

    A qualified arborist or competent person designated by the employer must assess and identify hazard trees before work begins.

  7. Under OSHA's General Duty Clause (Section 5(a)(1)), employers are required to provide a workplace free from what?

    Answer: Recognized hazards that are causing or likely to cause death or serious physical harm

    The General Duty Clause requires employers to protect workers from recognized hazards even when no specific standard exists.