CTO Airspace Structure & Regulations 4

Question 1

A pilot contacts the tower and says 'unable to comply' with a Class D entry instruction. What is the correct tower controller response?

Accepted Answer

Provide an alternative instruction or deny entry

Answer

When a pilot is unable to comply, the controller must issue an alternative clearance or instruct the aircraft to remain clear of the airspace.

Question 2

Military Operations Areas (MOAs) are depicted on sectional charts with what color boundary?

Accepted Answer

Teal/Cyan

Answer

MOAs are depicted on aeronautical charts with magenta dashed boundary lines and are labeled with the MOA name.

Question 3

What is the lateral dimension of the inner ring of standard Class C airspace?

Accepted Answer

5 NM radius

Answer

The inner ring of Class C airspace typically extends from the surface to 4,000 feet AGL within a 5 NM radius of the primary airport.

Question 4

A Restricted Area is 'hot' (active). What does this mean for a non-participating aircraft?

Accepted Answer

Entry is prohibited or requires ATC authorization

Answer

When a Restricted Area is active, entry is prohibited or requires specific authorization from the controlling agency due to hazardous activities.

Question 5

Victor airways (VOR Federal Airways) are defined as extending from 1,200 feet AGL to what upper limit?

Accepted Answer

17,999 feet MSL

Answer

Victor airways extend from 1,200 feet AGL up to but not including 18,000 feet MSL, where Class A airspace and Jet routes begin.

(CTO) Air Traffic Control Tower Operator Certification Practice Test