CTE Tools and Equipment Flashcards
6 cards from real CTE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CTE Tools and Equipment flashcards as text
When selecting a lifting sling for a rigging operation, which factor is MOST critical?
Answer: The sling's working load limit (WLL) relative to the load weight
The working load limit must always equal or exceed the weight of the load being lifted to prevent catastrophic sling failure.
A pneumatic tool requires a specific operating pressure. What instrument is used to verify the supply air pressure?
Answer: Pressure gauge
A pressure gauge is installed on the air supply line to confirm that the delivered pressure meets the tool's operational specification.
What is the purpose of an oscilloscope in electronic diagnostics?
Answer: To display electrical signal waveforms as a function of time
An oscilloscope visualizes electrical signals over time, allowing technicians to measure frequency, amplitude, and waveform shape to diagnose circuit faults.
A thermal imaging camera is used in predictive maintenance primarily to detect what?
Answer: Abnormal heat signatures indicating potential component failure
Thermal cameras detect infrared radiation to identify hot spots in electrical panels, motors, and mechanical components that may indicate impending failure.
Which tool is used to test the continuity of an electrical circuit?
Answer: Continuity tester or multimeter in continuity mode
A continuity tester or a multimeter set to continuity mode checks whether a complete electrical path exists between two points in a circuit.
What does 'calibration interval' mean for test and measurement equipment?
Answer: The maximum time allowed between calibration checks to maintain accuracy assurance
The calibration interval defines how frequently an instrument must be recalibrated to ensure its readings remain within acceptable accuracy limits.